Materials, data and limits
| Casing | Stainless steel AISI 316L glassblasted Ra<3.2 |
| Impeller | Stainless steel AISI 316L electropolished Ra<3.2 |
| Mechanical seal | Single, SiC/carbon (std) or SiC/SiC, FDA approved Double, SiC/carbon (std) or SiC/SiC, FDA approved |
| O-rings | EPDM, FKM, NBR (all FDA approved) |
| Motor | IP55; IEC frame B35; PTC thermistor; IE3; 3-phase |
| Pressure rating @ 20OC | PN10 – CTX 40-165, CTX 50-145, CTX 50-200, CTX 65-175 PN16 – CTX 65-230, CTX 65-240, CTX 80-205, CTX 80-212, CTX 80-260, CTX 100-230 |
| Liquid temp. | -10 °C ... +120 °C (140 °C for short periods during SiP) |
| Ambient temp. | -20 °C ... +40 °C |
| Viscosity | max ~150 cSt |
Built-on inverter
The Inverter allows full control over the operation of the pump by influencing motor speed. Changing motor speed affects the pumping parameters.
Industrial flanged connections
The industrial CTX I pumps are equipped with connections according to EN 1092-1 type11, ANSI 150 or BSPT thread.
Adjustable feet
The per fect solution allows the pump to be easily adapted to uneven, sloped ground. It can be used when there is need move to different location.
Brackets for fixing on concrete fundaments
Complete pump unit may stand on a baseplate to avoid movement. It can be firmly, permanently fixed to the ground.
Connection dimensions
| Model | BSPT male thread | EN1092-1 flange (std.) | ANSI 150 flange | |||
| Inlet | Outlet | Inlet | Outlet | Inlet | Outlet | |
| 40-165 | 1.5” | 1.25” | DN40 | DN32 | 1.5” | 1.25” |
| 50-145 | 2” | 1.5” | DN50 | DN40 | 2” | 1.5” |
| 50-200 | 2” | 1.5” | DN50 | DN40 | 2” | 1.5” |
| 65-175 | 2.5” | 2” | DN65 | DN50 | 2.5” | 2” |
| 65-230 | 2.5” | 2” | DN65 | DN50 | 2.5” | 2” |
| 65-240 | 2.5” | 1.5” | DN65 | DN40 | 2.5” | 1.5” |
| 80-205 | 3” | 2” | DN80 | DN50 | 3” | 2” |
| 80-212 | 3” | 2.5” | DN80 | DN65 | 3” | 2.5” |
| 80-260 | 3” | 2.5” | DN80 | DN65 | 3” | 2.5” |
| 100-230 | 4” | 3” | DN100 | DN80 | 4” | 3” |
